Making a new autoexec file

GTT TFT Support

Moderator: Mods

Post Reply
djvoss
LCD!
Posts: 13
Joined: Thu Jul 10, 2014 8:49 am

Making a new autoexec file

Post by djvoss » Thu Jul 10, 2014 3:07 pm

After making a sequence of commands using the GTT Suport Tool then checking the result, How do I save this file to be used as the autoexec?? .bin doesnot seem to work. Thanks Don

Tino
Matrix Orbital
Matrix Orbital
Posts: 158
Joined: Wed May 22, 2013 9:04 am
Location: Matrix Orbital
Contact:

Re: Making a new autoexec file

Post by Tino » Thu Jul 10, 2014 3:19 pm

Hi Don,

Thank you for posting your question to our forum.

To Create a Autoexec file:
-When you save the script file save it as a .bin file.
-Name the file 'AUTOEXEC" when saving it.
-Remove the file extension from your file. (.bin)
-Load the new file into SD Card.

I suggest you save the Old Autoexec to another location as a backup.

Thank you
Martino
Martino DeLeon
Matrix Orbital
Technical Support Representative

djvoss
LCD!
Posts: 13
Joined: Thu Jul 10, 2014 8:49 am

Re: Making a new autoexec file

Post by djvoss » Thu Jul 10, 2014 3:26 pm

The KEY was to remove the .bin extension. Thanks

Tino
Matrix Orbital
Matrix Orbital
Posts: 158
Joined: Wed May 22, 2013 9:04 am
Location: Matrix Orbital
Contact:

Re: Making a new autoexec file

Post by Tino » Fri Jul 11, 2014 8:25 am

Hi Don,

Thank you for posting on our forums.
If you have any other questions or concerns please feel free to ask.

Thank you
Martino
Martino DeLeon
Matrix Orbital
Technical Support Representative

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 1 guest