Page 1 of 1

Manual Issues

Posted: Tue Sep 11, 2012 4:00 pm
by KeepItSimpleStupid
I encourage you to go to this URL: http://www.matrixorbital.ca/manuals/GTT ... 1.3%29.pdf

and search for "2.6" and also "Touch"

Not much information at all.

Re: Manual Issues

Posted: Tue Sep 11, 2012 4:10 pm
by Clark
Thank you for your feedback; what kind of information would you like to see added to the Touch section of the GTT Protocol manual?

Troy

Re: Manual Issues

Posted: Tue Sep 11, 2012 6:23 pm
by KeepItSimpleStupid
What I found odd was section 2.6 is really section 6.1
2.6 Should be Touch and it's Draw pixel.

e.g. 2.6 Draw Pixel

These are grouped together
--
2.6 Touch
6.1 Calibrate Touch Screen
--

That I find really, really ODD.

Which is why I said to look for both "touch" and "2.6"

Re: Manual Issues

Posted: Wed Sep 12, 2012 8:49 am
by Clark
I see what you mean. The confusion comes from a desire to number both headings and commands while keeping the command names as short as possible.

Draw Pixel is technically section 2.2.6, while Calibrate Touch Screen would be 2.6.1.

I'll look at alternative solutions for the next manual revision.

Thanks again,
Troy