Manual Issues

GTT TFT Support

Moderator: Mods

Post Reply
KeepItSimpleStupid
LCD?
Posts: 4
Joined: Sat Nov 05, 2011 4:30 pm

Manual Issues

Post by KeepItSimpleStupid »

I encourage you to go to this URL: http://www.matrixorbital.ca/manuals/GTT ... 1.3%29.pdf

and search for "2.6" and also "Touch"

Not much information at all.

Clark
Matrix Orbital
Matrix Orbital
Posts: 881
Joined: Fri Aug 17, 2007 10:58 am
Location: Matrix Orbital
Contact:

Re: Manual Issues

Post by Clark »

Thank you for your feedback; what kind of information would you like to see added to the Touch section of the GTT Protocol manual?

Troy
Troy Clark
Design & Development
Matrix Orbital

KeepItSimpleStupid
LCD?
Posts: 4
Joined: Sat Nov 05, 2011 4:30 pm

Re: Manual Issues

Post by KeepItSimpleStupid »

What I found odd was section 2.6 is really section 6.1
2.6 Should be Touch and it's Draw pixel.

e.g. 2.6 Draw Pixel

These are grouped together
--
2.6 Touch
6.1 Calibrate Touch Screen
--

That I find really, really ODD.

Which is why I said to look for both "touch" and "2.6"

Clark
Matrix Orbital
Matrix Orbital
Posts: 881
Joined: Fri Aug 17, 2007 10:58 am
Location: Matrix Orbital
Contact:

Re: Manual Issues

Post by Clark »

I see what you mean. The confusion comes from a desire to number both headings and commands while keeping the command names as short as possible.

Draw Pixel is technically section 2.2.6, while Calibrate Touch Screen would be 2.6.1.

I'll look at alternative solutions for the next manual revision.

Thanks again,
Troy
Troy Clark
Design & Development
Matrix Orbital

Post Reply