Hi,
Is there any need of additional IC (e.g. MAX232) for RS232 communication between PC or microcontroller and GTT480272A?
Thanks
Is there any need of additional IC (e.g. MAX232) ?
Moderator: Mods
-
- LCD!
- Posts: 14
- Joined: Sun Sep 18, 2011 11:49 pm
Hi Pads,
In the default configuration, the GTT will communicate at RS232 levels. If you use a micro-controller you may have to put the display in TTL mode or use a converter.
Out of the box, the unit will communicate at 115200kbps, with 8 bits data, one stop bit, no parity bit, and hardware flow control enabled.
Thanks,
~Troy
In the default configuration, the GTT will communicate at RS232 levels. If you use a micro-controller you may have to put the display in TTL mode or use a converter.
Out of the box, the unit will communicate at 115200kbps, with 8 bits data, one stop bit, no parity bit, and hardware flow control enabled.
Thanks,
~Troy
Troy Clark
Design & Development
Matrix Orbital
Design & Development
Matrix Orbital