GX Typoon Damaged?

GX and Typhoon hardware, this includes, displays, cables and accessory cards.

Moderator: Mods

Post Reply
UrbanMarine
LCD?
Posts: 3
Joined: Thu Jun 26, 2008 8:13 pm

GX Typoon Damaged?

Post by UrbanMarine »

I just got a new GX Typoon and I noticed the background isn't all blue but has a red tint to it. Its like the red in the pixels are not going away. I tried using the LCD config to adjust it and nothing worked. Also its most visible when you look at the unit straight on. Any ideas?

Ray
Matrix Orbital
Matrix Orbital
Posts: 742
Joined: Thu Dec 13, 2001 4:00 pm
Location: Earth.... I think..
Contact:

Post by Ray »

A picture would definitly help but by the sounds of it your contrast is set a little bit on the high side.

UrbanMarine
LCD?
Posts: 3
Joined: Thu Jun 26, 2008 8:13 pm

Post by UrbanMarine »


Ray
Matrix Orbital
Matrix Orbital
Posts: 742
Joined: Thu Dec 13, 2001 4:00 pm
Location: Earth.... I think..
Contact:

Post by Ray »

Thats normal for the blue/white inverse LCD's (from any manufacturer not just ours) its called 'ghosting'. The blue/white inverse displays are most plagued by this, the standard (but boring) yellow/green the least. VFD and OLED technology don't exhibit this problem at all.

As you turn contrast down the effect will be less (but then again so will your contrast) there's nothing that can be done about that.

UrbanMarine
LCD?
Posts: 3
Joined: Thu Jun 26, 2008 8:13 pm

Post by UrbanMarine »

Ah gotcha. Thanks for the help and info.

Post Reply