|
It is currently Thu May 23, 2013 11:29 am
|
View unanswered posts | View active topics
 |
|
 |
|
| Author |
Message |
|
Derelique
|
Post subject: Plugins  Posted: Fri Apr 15, 2005 6:56 pm |
Joined: Wed Apr 13, 2005 8:43 pm
Posts: 9
Location: Australia
|
|
Another question....can I use plugins that I see at LCDC website with LCD smartie? Or they are not compatible??
_________________
any opinions express by myself is entirely my own and it doesn't mean everyone has to agree with it.
|
|
|
|
 |
|
PilchY
|
Post subject: Posted: Mon Apr 18, 2005 2:14 pm |
Joined: Mon Apr 18, 2005 2:02 pm
Posts: 1
|
|
got my hnads on a LK202-24-USB - WB and i need to get a copy of the drivers to install the equipment so that LCD smartie can pick it up... anyone help me?
|
|
|
|
|
|
|
Henry
|
Post subject: Re: Plugins Posted: Tue Apr 19, 2005 9:55 am |
| OMNIPRESENT |
 |
Joined: Tue Aug 14, 2001 6:00 pm
Posts: 2801
|
Derelique wrote: Another question....can I use plugins that I see at LCDC website with LCD smartie? Or they are not compatible??
Hi Derelique,
No, LCDC plugins will not work with LCD Smartie and vice versa.
_________________
Henry J.
President
Matrix Orbital
|
|
|
|
|
|
|
Henry
|
Post subject: Posted: Tue Apr 19, 2005 9:57 am |
| OMNIPRESENT |
|
Joined: Tue Aug 14, 2001 6:00 pm
Posts: 2801
|
PilchY wrote: got my hnads on a LK202-24-USB - WB and i need to get a copy of the drivers to install the equipment so that LCD smartie can pick it up... anyone help me?
Hi PilchY,
Thanks for getting a LK292-24-USB-WB, the drivers are located in the hardware forum, under a stickied thread called USB DRIVERS!!!
http://www.lcdforums.com/forums/viewtopic.php?t=1016
If you have any problems, post there.
_________________
Henry J.
President
Matrix Orbital
|
|
|
|
|
|
|
G78
|
Post subject: two mx6 lcd screen vs software. Posted: Sat Jul 16, 2005 9:00 am |
Joined: Sun Jul 03, 2005 5:06 pm
Posts: 13
|
|
Just wondering, if i bought another mx6, and put it in the same pc... would i be able to program them both seperatly withought any problem with lcdc?
_________________
=G78=
|
|
|
|
|
|
|
Tom
|
Post subject: Posted: Mon Jul 18, 2005 9:53 am |
| Matrix Orbital |
 |
Joined: Mon Jul 19, 2004 4:43 pm
Posts: 1030
Location: Calgary
|
|
G78,
You will just need to open up another LCDC. This will create another LCDC application. You will then set up the unit for the correct definition file and com port in the Configuration/test section. Test out the unit, and you should be good to go afterwards.
If you have anymore questions or concerns, please feel free to post.
:D
Best Regards,
|
|
|
|
|
|
|
G78
|
Post subject: Posted: Mon Jul 18, 2005 6:38 pm |
Joined: Sun Jul 03, 2005 5:06 pm
Posts: 13
|
|
Ok, so 2 time LCDC software open..
One for each lcd screen...
How would it recognise each one seperatly, if it was two identical MX6?
Do they use a different coms port each?
_________________
=G78=
|
|
|
|
|
|
|
Henry
|
Post subject: Posted: Tue Jul 19, 2005 12:32 am |
| OMNIPRESENT |
|
Joined: Tue Aug 14, 2001 6:00 pm
Posts: 2801
|
G78 wrote: Ok, so 2 time LCDC software open..
One for each lcd screen...
How would it recognise each one seperatly, if it was two identical MX6?
Do they use a different coms port each?
Yup, each MX will create its own virtual COM Port.
_________________
Henry J.
President
Matrix Orbital
|
|
|
|
|
|
|
G78
|
Post subject: Posted: Tue Jul 19, 2005 8:59 pm |
Joined: Sun Jul 03, 2005 5:06 pm
Posts: 13
|
|
thats another question.. how much ressources lcdc and MX6 takes to run smoothly... How would it run with two? Could there be bugs appearing having two running at the same time?
Like right now.. MX6+lcdc and the zephyrus kit... they really dont like each others.. Or the drivers for the zephyrus really sucks.
_________________
=G78=
|
|
|
|
|
|
|
Tom
|
Post subject: Posted: Thu Jul 21, 2005 10:14 am |
| Matrix Orbital |
|
Joined: Mon Jul 19, 2004 4:43 pm
Posts: 1030
Location: Calgary
|
G78,
When you open another LCDC, it will be opened as a seperate LCDC, and the icon will have a number over it to indicate the different LCDC applications. LCDC doesn't take much resources, but it will also depend on what plugins or amount of plugins the program is using. You would be able to find better answers to LCDC at the LCDC forum at http://forums.lcdc.cc/index.php?showforum=6
I have ran two LCDC applications, and I haven't had any problems with it though.
If you have anymore questions or concerns, please feel free to post.
Best Regards,
|
|
|
|
|
|
|
|
 |
|
 |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
{ SMARTFEED }
