LK204-25 serial protocol


Moderators: Henry, Mods

Post Reply
Posts: 4
Joined: Sat Feb 28, 2015 8:04 pm

LK204-25 serial protocol

Post by MarioAtJazz » Sat Feb 28, 2015 8:35 pm

Another, but different question:

How behaves the display when the receive buffer is full?
The Manual says: FlowControl=none.

How can this work correct?
Is the integrated processor so fast, that it is always ready on the rs232 for receiving characters?
And with 115200 Baud ?

I am puzzled.

Thx, Mario

Matrix Orbital
Matrix Orbital
Posts: 870
Joined: Fri Aug 17, 2007 10:58 am
Location: Matrix Orbital

Re: LK204-25 serial protocol

Post by Clark » Mon Mar 02, 2015 8:02 am

Hello Mario,

The LK205-25 has a 128 byte input buffer, which is difficult to fill even at 115200 baud. Should the buffer fill the display will drop characters, at which point you might consider reducing the baud rate or adding delays.

Troy Clark
Design & Development
Matrix Orbital

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests