LK202-25-USB and B202A-BK

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
blaster25dk
LCD?
Posts: 1
Joined: Mon Jun 02, 2014 12:14 pm

LK202-25-USB and B202A-BK

Post by blaster25dk »

Hello

I bought a LK202-25-USB and a B202A-BK 7 keypad. But how do I connect them? There are 12 pins on the LK202-25, but only 6 hole connector on the B202-BK.
Should it be connected to the first 6 pins? The last 6 pins? Or in the middle?

Regards Nick

Tino
Matrix Orbital
Matrix Orbital
Posts: 158
Joined: Wed May 22, 2013 9:04 am
Location: Matrix Orbital

Re: LK202-25-USB and B202A-BK

Post by Tino »

Hi Nick,

Thank you for posting your question to our forums.

With the B202A-BK you will want to center the connector on the Keypad header of your LK202-25-USB.

In the manual for your display you can find the Pin out for the keypad header. If you center the connector on the header you will be using Rows 3,4 and 5 and Columns 1,2 and 3. You can find the manual to your display here:
http://www.matrixorbital.ca/manuals/LK_ ... 02-25-USB/

Also you can find the schematic to your Keypad which will show the pin out here:
http://www.matrixorbital.ca/manuals/Accessories/Keypad/

If you have any other questions or concerns please feel free to ask.
Thank you
Martino
Martino DeLeon
Matrix Orbital
Technical Support Representative

Post Reply