VK204-25

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
ravton
LCD!
Posts: 12
Joined: Fri Oct 05, 2001 6:00 pm

Post by ravton »

Ok, I have a VK204-25. For my first exercise I'm trying to figure out how to set the startup screen (the default text that is displayed when the unit starts).

Unfortunately the only place I can find those commands are for other units, and those command don't seem to work. So how about it, does the VK204-25 have the capability to remember the startup screen?

If not, does it at least have the ability to turn off that damn cursor by default. It looks cheap as hell watching that cursor blink for 60 seconds while the system boots. This is prototype system and I really need to make it look pretty.

Thanks,
ravton@yahoo.com

Henry
OMNIPRESENT
OMNIPRESENT
Posts: 3002
Joined: Tue Aug 14, 2001 6:00 pm
Contact:

Post by Henry »

Currently the VK204-25 cannot have a custom start up / splash screen as it has no memory chip. As well, there is no way to turn of the blinking cursor as that is the only indication that the unit is powered up. Please e-mail me if you have any more questions.
Henry J.
President
Matrix Orbital

Post Reply