Page 1 of 1

GLK19264-7T-1U-USB / mogdsharp

Posted: Fri Nov 08, 2013 8:48 am
by abrown
Hi all,

I am having an issue with the mogdsharp software with a GLK19264-7T-1U-USB. We've been using these LCDs in our appliances for several years with no issues. However, in a current build, when loading bitmaps and fonts into the LCD memory using the mogdsharp software, we get the following error:

There was a problem uploading the Image to the device..(Read Timeout)

The COM port and Baud Speed are both set correctly. One thing I did notice is that the only option for PCB Revision is 1.x. This is one of the new boards (with "a" appended to the model number), so I was thinking that may have something to do with it. Any thoughts?

Re: GLK19264-7T-1U-USB / mogdsharp

Posted: Fri Nov 08, 2013 9:28 am
by Tino
Hi abrown,

To better understand exactly what is going on with your GLK19264-7T-1U-USB I just have a couple questions.

Does Mogd# detect the display when you use the "Auto Detect Display" feature?

Can you write text to the display or draw to the display?

Thanks,
Martino

Re: GLK19264-7T-1U-USB / mogdsharp

Posted: Fri Nov 08, 2013 10:38 am
by abrown
Thanks for the quick response. :)

When I Auto Detect Display, it does automatically detect the module. I can send text to the display with no issues. I have not tried drawing yet, but will do so shortly and let you know the result.

Re: GLK19264-7T-1U-USB / mogdsharp

Posted: Fri Nov 08, 2013 10:51 am
by Tino
Hi abrown,

Ok that's good.

Can you try running Mogd# as administrator and moving the Mogd# folder to your desktop. This could fix the issue.

Thanks
Martino

Re: GLK19264-7T-1U-USB / mogdsharp

Posted: Fri Nov 08, 2013 11:00 am
by abrown
Thanks Tino, that seems to have resolved the issue. :)

Re: GLK19264-7T-1U-USB / mogdsharp

Posted: Fri Nov 08, 2013 11:03 am
by Tino
Perfect!

Martino