GLK240128-25 memory problems

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
gstlachi
LCD?
Posts: 6
Joined: Thu Jun 13, 2013 12:42 pm

GLK240128-25 memory problems

Post by gstlachi »

Hi,

I´m uploading 12 images to the LCD. The images are uploaded correctly, but, when i upload 1 type of font all images uploaded before are erased, but the fonts remains. At the same time, when first, i upload fonts and after that the images the fonts are erased and the images remains.

The images are uploaded from ID 1 to ID 12, the font are in ID 1 and Im using the MOGD# Software v1.1.5. Am i overriding locations?

Can you help me with this.

Thanks
Kind of regards

Tino
Matrix Orbital
Matrix Orbital
Posts: 158
Joined: Wed May 22, 2013 9:04 am
Location: Matrix Orbital

Re: GLK240128-25 memory problems

Post by Tino »

Hi,

I understand you are having an issue with uploading.
What PCB Revision is your GLK240128-25?
Also what firmware are you using?

Thank you
Martino
Martino DeLeon
Matrix Orbital
Technical Support Representative

gstlachi
LCD?
Posts: 6
Joined: Thu Jun 13, 2013 12:42 pm

Re: GLK240128-25 memory problems

Post by gstlachi »

Hi Tino,

Thanks for helping.

The LCD has PCB R4.0 printed and I'm using firmware 8.3. I'm noticing that only the image on first location (ID 1) is erased when i upload a font and viceversa only first positions.

Tino
Matrix Orbital
Matrix Orbital
Posts: 158
Joined: Wed May 22, 2013 9:04 am
Location: Matrix Orbital

Re: GLK240128-25 memory problems

Post by Tino »

Hi,

Please upgrade your firmware to 8.4 this may help. You can find the firmware upgrader at:
http://www.matrixorbital.ca/software/GLT%20Series/

Please let me know if this works.
Thanks
Martino
Martino DeLeon
Matrix Orbital
Technical Support Representative

Post Reply