Wall wart power source

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
harriscohen
LCD?
Posts: 1
Joined: Sun Sep 09, 2001 6:00 pm

Post by harriscohen »

I am writing to inquire if I can connect a 12V wall wart directly to a 4-pin SIP adapter (pins 1 & 4 only) in order to power my LK162-12-V. I am using the LCD in an embedded environment and a regular floppy drive cable is not useful and my RS-232 ports do not send power down pin 9.

Thank you. Harris

Henry
OMNIPRESENT
OMNIPRESENT
Posts: 3002
Joined: Tue Aug 14, 2001 6:00 pm
Contact:

Post by Henry »

On 2001-09-10 13:17, harriscohen wrote:
I am writing to inquire if I can connect a 12V wall wart directly to a 4-pin SIP adapter (pins 1 & 4 only) in order to power my LK162-12-V. I am using the LCD in an embedded environment and a regular floppy drive cable is not useful and my RS-232 ports do not send power down pin 9.

Thank you. Harris
I don't see why that wouldn't work. As long as you connect it properly it should work. The power regulator on the LCD will keep it safe.
Henry J.
President
Matrix Orbital

Post Reply