LK202-24-USB (rev 1.6) Reset to factory defaults

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
stanners
LCD?
Posts: 1
Joined: Tue Dec 04, 2012 10:24 am

LK202-24-USB (rev 1.6) Reset to factory defaults

Post by stanners »

Hi,

I have a MX2 (LK202-24-USB (rev 1.6)) which I am wanting to reset to factory defaults. Could you possibly send me the software program and memory chip file to enable me to do this.

Cheers

Clark
Matrix Orbital
Matrix Orbital
Posts: 881
Joined: Fri Aug 17, 2007 10:58 am
Location: Matrix Orbital
Contact:

Re: LK202-24-USB (rev 1.6) Reset to factory defaults

Post by Clark »

Hi Stanners,

All display settings can be saved using the uProject tool. I've attached the default .mem file which you can use to Initialize Memory in uProject, being careful not to disturb communication during the upload process.

Troy
Attachments
LK202-24-USB pcb1.6 c2.2.zip
LK202-24-USB PCB Rev1.6 .mem file
(273 Bytes) Downloaded 291 times
Troy Clark
Design & Development
Matrix Orbital

Post Reply