glk19264 software

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
agpatel
LCD?
Posts: 2
Joined: Thu Jun 30, 2011 4:39 pm

glk19264 software

Post by agpatel »

Just got a glk19264 (usb version) and would like to know what software is compatible with this to show speedfan temps and such? Tried lcdc and did nto work out great..any help is appreciated...

Clark
Matrix Orbital
Matrix Orbital
Posts: 881
Joined: Fri Aug 17, 2007 10:58 am
Location: Matrix Orbital
Contact:

Post by Clark »

Hello Agpatel,

Sorry to hear you are not having good results with LCDC, please be sure to try the LK204-25 profile. 19200 is the default baud rate, make sure that and the com port are selected correctly and you should be ok. There may be a run option in LCDC, you might have to hit that to start seeing updates to the screen.

Thanks,
~Troy
Troy Clark
Design & Development
Matrix Orbital

agpatel
LCD?
Posts: 2
Joined: Thu Jun 30, 2011 4:39 pm

Post by agpatel »

I will give it a try.

Should there of been a LCDC activation code with my GLK display? As I did not see one.

Thanks.
Clark wrote:Hello Agpatel,

Sorry to hear you are not having good results with LCDC, please be sure to try the LK204-25 profile. 19200 is the default baud rate, make sure that and the com port are selected correctly and you should be ok. There may be a run option in LCDC, you might have to hit that to start seeing updates to the screen.

Thanks,
~Troy

Clark
Matrix Orbital
Matrix Orbital
Posts: 881
Joined: Fri Aug 17, 2007 10:58 am
Location: Matrix Orbital
Contact:

Post by Clark »

Hi Agpatel,

Unfortunately, an LCDC license was only included in our older MX bundles, not with your GLK.

Thanks,
~Troy
Troy Clark
Design & Development
Matrix Orbital

Post Reply