3 mx630 displays on windows 7 x64 7600 , LCDC conection fail

[pelo911]

the 3 displays are brand new and it's the first time i'm using any king of display.
i connect them to the motherboard (not with USB cable)

i installed the ftdi 2.07 driver and the divice maneger show that the device working:



the displays show "matrix orbital mx6" + logo

but the LCDC can't find the device:

[Ray]

There should be a second Matrix orbital device underneeth com ports. Do you have any exclamation marks in your device manager? You can grab a test version of our latest driver here yes i am aware the version is lower but it is really a newer driver.

[pelo911]

There should be a second Matrix orbital device underneeth com ports. Do you have any exclamation marks in your device manager? You can grab a test version of our latest driver here yes i am aware the version is lower but it is really a newer driver.

after i install your latest driver i can see in the device manager the 3 com port:


but LCDC still not recognize my 3 displays:

[Ray]

Can you communicate with the display with something like uproject?

[pelo911]

Can you communicate with the display with something like uproject?

no

sometime it recognized only the COM4

[Ray]

If you manually select a display and try the other functions does it communicate properly?

[pelo911]

If you manually select a display and try the other functions does it communicate properly?

i install windows vista x64 sp2

same problem.

i try to use the reular usb cable instead of the second cable:
http://www.matrixorbital.com/mx234-p-20.html

now LCDC find the displays
but how can i controll them separately?

one of the display show only one line and flickering all the time
i have short video for you to see.
this is my email: pelo911@walla.co.il

thanks