how to we set colours!!!

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
abhas
LCD?
Posts: 4
Joined: Thu Aug 23, 2001 6:00 pm
Location: abhas@deeproot.co.in
Contact:

Post by abhas »

Hi,

we're having problems again!! Colours don't seem to be working - niethet the set_colour command nor the colour arguments in the rectangle command??

I am sure someone out there has done it before... could you just guide us about what the correct procedure could be?? its bad to get stuck on such easy things...

thanks and cheers,
abhas.
---
DeepRoot Linux
Bangalore, INDIA

Henry
OMNIPRESENT
OMNIPRESENT
Posts: 3002
Joined: Tue Aug 14, 2001 6:00 pm
Contact:

Post by Henry »

4.2.1 Set drawing color (254 99 [color])

This command sets the drawing color for subsequent graphic commands that do not have the drawing color passed as a parameter. The parameter [color] is the value of the color where white 0 Hex, and black is 255 Hex. Note: All non-zero values will display as black.

http://www.matrixorbital.com/manuals/gl ... /index.htm
Henry J.
President
Matrix Orbital

Post Reply