LK204-25_PC and his screen

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

fra dolpi
LCD!
Posts: 12
Joined: Mon Mar 11, 2002 4:00 pm

Post by fra dolpi » Fri Mar 29, 2002 5:36 pm

hi,
i've a big problem with the big digits ! :smile:
the big digits fonts for the watch do not work properly... can yau tell me what to do in order to use them eith my lk204.25-pc ?
thanks,
fra

relix
Uber Slave
Uber Slave
Posts: 222
Joined: Wed Nov 14, 2001 4:00 pm
Location: Knokke, Belgium
Contact:

Post by relix » Sat Mar 30, 2002 7:58 am

are you using the Matrix Orbital demo? Yes, I have the same problem, there's nothing wrong with your LCD, it's the software.

CyPher
LCD Guru
Posts: 85
Joined: Fri Nov 30, 2001 4:00 pm
Contact:

Post by CyPher » Sat Mar 30, 2002 9:22 am

actually, from what i understand, it is one of several bugs in the hardware its self....

Henry
OMNIPRESENT
OMNIPRESENT
Posts: 2832
Joined: Tue Aug 14, 2001 6:00 pm
Contact:

Post by Henry » Sat Mar 30, 2002 11:04 am

One of a COUPLE bugs :smile:

These issues should be resolved very soon... I'll let you all know when and what we will do about your units.
Henry J.
President
Matrix Orbital

relix
Uber Slave
Uber Slave
Posts: 222
Joined: Wed Nov 14, 2001 4:00 pm
Location: Knokke, Belgium
Contact:

Post by relix » Mon Apr 01, 2002 10:49 am

you mean it's possible to "update" the firmware? I thought the square PIC's weren't updateable nor readable? Or will you just ask them back and send new ones? That I guess would be a very expensive customer-support... There's a way to get it working, LCDriver does it...

Henry
OMNIPRESENT
OMNIPRESENT
Posts: 2832
Joined: Tue Aug 14, 2001 6:00 pm
Contact:

Post by Henry » Mon Apr 01, 2002 11:26 am

It's going to be have to done like that ...

LCDriver makes it's own large digits... our looks nicer though :grin:

_________________
Henry J.
Technical Support
Matrix Orbital

<font size=-1>[ This Message was edited by: Henry on 2002-04-01 11:26 ]</font>

relix
Uber Slave
Uber Slave
Posts: 222
Joined: Wed Nov 14, 2001 4:00 pm
Location: Knokke, Belgium
Contact:

Post by relix » Mon Apr 01, 2002 11:53 am

you mean there's totally no way to get the large digits working? Oooooh man ... :sad:

Henry
OMNIPRESENT
OMNIPRESENT
Posts: 2832
Joined: Tue Aug 14, 2001 6:00 pm
Contact:

Post by Henry » Tue Apr 02, 2002 10:12 am

OK, here is the skinny on the fat...

the manual for the descimal value of the large digit is wrong... it says 23 and it should be 35...

So here is the process...

0xFE
110

0xFE
35
[col]
[digit]

Thanks Mat!!!

Updating all the manuals right now... :sad:
_________________
Henry J.
Technical Support
Matrix Orbital

<font size=-1>[ This Message was edited by: Henry on 2002-04-02 10:17 ]</font>

relix
Uber Slave
Uber Slave
Posts: 222
Joined: Wed Nov 14, 2001 4:00 pm
Location: Knokke, Belgium
Contact:

Post by relix » Sun Apr 21, 2002 2:55 am

still not working mate :sad:

Henry
OMNIPRESENT
OMNIPRESENT
Posts: 2832
Joined: Tue Aug 14, 2001 6:00 pm
Contact:

Post by Henry » Sun Apr 21, 2002 8:50 am

On 2002-04-21 02:55, relix wrote:
still not working mate :sad:
Works fine, tested it here. :razz:
Henry J.
President
Matrix Orbital

relix
Uber Slave
Uber Slave
Posts: 222
Joined: Wed Nov 14, 2001 4:00 pm
Location: Knokke, Belgium
Contact:

Post by relix » Mon Apr 22, 2002 10:54 am

what's wrong then? Must be some problem...

ultraspider
LCD Geek
Posts: 41
Joined: Sun Dec 02, 2001 4:00 pm
Location: belgium
Contact:

Post by ultraspider » Wed Apr 24, 2002 1:55 pm

still not working for me too...

Henry
OMNIPRESENT
OMNIPRESENT
Posts: 2832
Joined: Tue Aug 14, 2001 6:00 pm
Contact:

Post by Henry » Wed Apr 24, 2002 2:20 pm

How are you testiing it? who some source...
Henry J.
President
Matrix Orbital

relix
Uber Slave
Uber Slave
Posts: 222
Joined: Wed Nov 14, 2001 4:00 pm
Location: Knokke, Belgium
Contact:

Post by relix » Thu Apr 25, 2002 9:03 am

Aeris and with LCDC following the instructions Mat-d-Rat gave. The bars still don't work properly too (let me guess: LCDriver uses its own custom characters for it?)

ultraspider
LCD Geek
Posts: 41
Joined: Sun Dec 02, 2001 4:00 pm
Location: belgium
Contact:

Post by ultraspider » Sun May 05, 2002 6:42 am

i have tried all the way to have large digit on the LK204-25-PC that I have found on this forum and that doesn't work ! i have never seen any large digit on my screen. Can you tell us what to do with the firmware or the LCD itself or something...

(i have seen that there's a new big caracter option in LCDC, can you tell us how to set it up, this time, it will maybe works)

thx

Post Reply

Who is online

Users browsing this forum: Baidu [Spider] and 4 guests