I own an MX412 and was wondering a couple of things.
To use the fan controller option you have to connect a floppy connector,can
I use one that comes directly off of my power supply?and also can I use any
usb cable with the screen,I have a longer one I wanted to use to make it
easier to route through my case.
Thanks
MX412 general questions
-
- Matrix Orbital
- Posts: 193
- Joined: Mon Nov 14, 2005 3:08 pm
- Location: Calgary, Alberta, Canada
- Contact:
Hi diarh34,
Thanks for posting on the forum! I have emailed you the answers to your questions however, for the benefit of others:
the answer to all of your questions is YES!
Thanks!
Thanks for posting on the forum! I have emailed you the answers to your questions however, for the benefit of others:
the answer to all of your questions is YES!
Thanks!
Clare Wagner
Sales Representative
Matrix Orbital
Visit me at: http://www.matrixorbital.ca/Members/
T: 403-229-2737 ext.200
cwagner@matrixorbital.ca
http://www.matrixorbital.com
http://www.matrixorbital.ca
http://www.marixorbital.com/forums
Sales Representative
Matrix Orbital
Visit me at: http://www.matrixorbital.ca/Members/
T: 403-229-2737 ext.200
cwagner@matrixorbital.ca
http://www.matrixorbital.com
http://www.matrixorbital.ca
http://www.marixorbital.com/forums
I have another question also,on the piece of paper that came in the box with the screen.It says to use a command in "command set" to stop the blinking cursor on the screen.How exactly to I get to command set?I've also been having a problem with lcdc sticking on one screen and never going to the next or just displaying the same screen over and over : / (this seems to only happen when I have winamp running).Also is there a way to program the keys on the keypad to do other things?
thanks,<3
thanks,<3
-
- -=Beloved by all=-
- Posts: 286
- Joined: Tue Aug 14, 2001 6:00 pm
- Location: ...I could tell you my velocity...
You are looking for this - it is the manual which describes the command set, http://www.matrixorbital.ca/manuals/LK_ ... SB_100.pdf
but you probably don't really want it. What you want is more knowledge about how to use LCDC. That, unfortunately, just takes a little time. Have a look at the LCDC site http://lcdc.planetdps.com/ and play with it for a few days. I think you will find that all your questions will find their own answers after you have played with it a bit - you will also gain the ability to do interesting new things like change key functions.
Good luck and have fun!
but you probably don't really want it. What you want is more knowledge about how to use LCDC. That, unfortunately, just takes a little time. Have a look at the LCDC site http://lcdc.planetdps.com/ and play with it for a few days. I think you will find that all your questions will find their own answers after you have played with it a bit - you will also gain the ability to do interesting new things like change key functions.
Good luck and have fun!