Help pluggin mx2 internally???

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
equilibrium
LCD?
Posts: 3
Joined: Fri Oct 14, 2005 6:33 am

Help pluggin mx2 internally???

Post by equilibrium »

Can anyone help me i want to connect the mx2 internally on my msi k8n diamond but wasnt sure on how could someone help please?
Thanks
DAve :lol:

Miles
Matrix Orbital
Matrix Orbital
Posts: 1105
Joined: Mon Mar 04, 2002 4:00 pm

Post by Miles »

Hi equilibrium,

Thank you for contacting Matrix Orbital forums. First off, do you have an internal USB cable like the one shown here: http://www.matrixorbital.com/product_in ... munication
Miles Y.
Head of Technical Support
Product Manager
Matrix Orbital

equilibrium
LCD?
Posts: 3
Joined: Fri Oct 14, 2005 6:33 am

Post by equilibrium »

Miles wrote:Hi equilibrium,

Thank you for contacting Matrix Orbital forums. First off, do you have an internal USB cable like the one shown here: http://www.matrixorbital.com/product_in ... munication
Hi Miles thanks for replying yes i have a internal usb cable as shown.
Thanks Dave :)

Tom
Matrix Orbital
Matrix Orbital
Posts: 1030
Joined: Mon Jul 19, 2004 4:43 pm
Location: Calgary
Contact:

Post by Tom »

Hi equilibrium,

Here is the following configuration.

+5V goes to Vcc(Pin1)
D- goes to Data0-(Pin 3)
D+ goes to Data0+(Pin 5)
Gnd goes to Ground(Pin 7)

D- might be shown as something else like P- on your board, but the configuration will be the same.

If you have anymore questions or concerns, please feel free to post them.

Best Regards,

equilibrium
LCD?
Posts: 3
Joined: Fri Oct 14, 2005 6:33 am

Post by equilibrium »

Tom wrote:Hi equilibrium,

Here is the following configuration.

+5V goes to Vcc(Pin1)
D- goes to Data0-(Pin 3)
D+ goes to Data0+(Pin 5)
Gnd goes to Ground(Pin 7)

D- might be shown as something else like P- on your board, but the configuration will be the same.

If you have anymore questions or concerns, please feel free to post them.

Best Regards,

Hi
Thanks for your reply i will give it a go and see if not ill get back to you. Thanks for your help
DAve

Post Reply