Dallas One wire Connectors?

LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT Series

Moderators: Henry, Mods

Post Reply
Johnny
LCD Guru
Posts: 99
Joined: Fri Jan 16, 2004 3:01 am
Location: Out on $1.8 mill Bail
Contact:

Dallas One wire Connectors?

Post by Johnny » Mon Feb 23, 2004 4:05 am

Are there any other functions or uses for the dallas one wire connectors other than temp probes or digital pots? i have a few spare mate connectors and was wondering if i could utilize them?
I prefer to have a bottle in front of me than a full frontal Labotomy!

Check ma Bad, Invisible, Bail making Self!

Miles
Matrix Orbital
Matrix Orbital
Posts: 1105
Joined: Mon Mar 04, 2002 4:00 pm

Post by Miles » Mon Feb 23, 2004 9:36 am

Hello...

Please see the following link for more ideas regarding 1-wire devices...

http://www.maxim-ic.com/1-Wire.cfm
Miles Y.
Head of Technical Support
Product Manager
Matrix Orbital

Johnny
LCD Guru
Posts: 99
Joined: Fri Jan 16, 2004 3:01 am
Location: Out on $1.8 mill Bail
Contact:

Post by Johnny » Mon Feb 23, 2004 10:00 am

Hi, thanks Miles!

Being a total noob here i guess that means nothing useful?


Ah well... ill have to make some more temp probes and stick them to anything i can find!
I prefer to have a bottle in front of me than a full frontal Labotomy!

Check ma Bad, Invisible, Bail making Self!

Miles
Matrix Orbital
Matrix Orbital
Posts: 1105
Joined: Mon Mar 04, 2002 4:00 pm

Post by Miles » Mon Feb 23, 2004 11:38 am

If you have a specific question regarding a device, just ask!! :D
Miles Y.
Head of Technical Support
Product Manager
Matrix Orbital

scholzie
LCD?
Posts: 1
Joined: Mon Feb 23, 2004 10:35 pm
Contact:

Post by scholzie » Mon Feb 23, 2004 10:42 pm

What is the model number of the DOW probe? They have an econo, normal, high-precision, etc. I think the normal one is DS18S20, but I'm not too sure.

Johnny
LCD Guru
Posts: 99
Joined: Fri Jan 16, 2004 3:01 am
Location: Out on $1.8 mill Bail
Contact:

Post by Johnny » Tue Feb 24, 2004 2:27 am

Miles wrote:If you have a specific question regarding a device, just ask!! :D
:roll: :eyebrow: very helpful!

yes which devices can i usefully connect!? <:) got the temp probes and dont need a digital pot, anything else anyone got connected?

6 spare headers seems like such a waste!
I prefer to have a bottle in front of me than a full frontal Labotomy!

Check ma Bad, Invisible, Bail making Self!

Pheonix
LCD Guru
Posts: 140
Joined: Tue Nov 27, 2001 4:00 pm
Contact:

Post by Pheonix » Tue Feb 24, 2004 12:24 pm

I like the digital potentiometers!

Does anyone know if you could feasibly hook these into LCDC? Then you could have an auto and a manual mode (selected between by a keypad button...) with the digital potentiometers controlling fan speed while in manual, and maybe you could change them to something else while in auto, volume? something like that

Would be quite cool I think

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests