INTERNAL USB CABLE!!!

Post by **Henry** » Tue Mar 18, 2003 4:19 pm

OK, after countless e-mails, forum posts and phone calls.. HERE IT IS!!!

it's 2 feet long, and has one end unconnected for different mother boards. Please read the LK202-24-USB manual for the pinout on the LCD. If you cannot figure this out on your own, you should probably NOT be doing it.

Link: http://www.matrixorbital.com/accessories.htm

Most of our distributors should have this cable soon, and it always helps if you call then

Any questions/concerns let us know!

tok3n · Post by **tok3n** » Wed Mar 19, 2003 1:07 am

Weee! Yay Henry!

Comes with connector so we can tailor it to our own mobos right?

They are 5 pin connectors (standard) right? So we just leave a space for whatever place the N/A or "not used" pin is right?

Miles · Post by **Miles** » Wed Mar 19, 2003 8:52 am

Yes, it comes with a connector that can be easily tailored to your needs and it is a 5 pin connector that can be adjusted according to your mobo pin-out.

Pheonix · Post by **Pheonix** » Wed Mar 19, 2003 10:01 am

Well done MO

/me waits for the stream of: "I blew my motherboard and LCD with the internal cable" emails to come in

Miles · Post by **Miles** » Wed Mar 19, 2003 10:03 am

Isn't that a frightning thought!!

Pheonix · Post by **Pheonix** » Wed Mar 19, 2003 10:34 am

Well it is for you lot

....

Until I blow something up

tok3n · Post by **tok3n** » Wed Mar 19, 2003 2:43 pm

Now if there was only an aluminum bay with keypad

. I'm leaning toward just play aluminum and foregoing the keypad for the sake of aesthetics. Plus, I don't see THAT much use for the pad. :/

Pheonix · Post by **Pheonix** » Wed Mar 19, 2003 3:33 pm

I expect you could mod the pad too!

Post by **Henry** » Thu Mar 27, 2003 10:50 pm

TTT, a "guide" on installing is coming soon.