Keypad Help!!

Zezzo · Post by **Zezzo** » Sat Feb 08, 2003 5:05 pm

My keypad is set up in the following way:
C = Enter, D = Up arrow, E = Down arrow, I = F2, J = F1, K = left arrow, but there is no corresponding key for the Right arrow. I'm using the newest version of LCDC with a MX213. I'm wondering if anyone out there has seen this configuration or what?

Zezzo · Post by **Zezzo** » Sun Feb 09, 2003 9:40 am

I figured it out, the keypad was plugged into the wrong pins on the back of the LCD, shifting the plug one place to the right gave me the following settings
Up = K
Left = R
Down = L
Right = F
Enter = J
F2 = P
F1 = Q

Pheonix · Post by **Pheonix** » Sun Feb 09, 2003 12:29 pm

I know the codes in the manual where wrong, they should have been:

Enter = J
F2 = P
F1 = Q

UP Arrow = K
Right Arrow = F
Down Arrow = L
Left Arrow = R

However looks like the lead for the keypad was also wrong

Well done for figuring it out!