Search found 247 matches
- Mon Jul 22, 2019 3:17 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE2 QSPI not responding
- Replies: 5
- Views: 4972
Re: EVE2 QSPI not responding
Hi Blake, Could you specify which demo you are referencing? It is recommended that the ACTIVE command is sent to wake up the Graphics controller. We could try taking a look at the file here, though we don't actually use a Saleae logic analyzer. While the backlight doesn't need to be connected, 3V3 p...
- Thu Jul 18, 2019 4:22 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE2 QSPI not responding
- Replies: 5
- Views: 4972
Re: EVE2 QSPI not responding
Hey there Broth! Welcome to the forums! Could you provide the initialization code that you are using for your setup? In all of our demos we send the following to the display: Gpu_Hal_SetSPI(host, GPU_SPI_SINGLE_CHANNEL, GPU_SPI_ONEDUMMY); /* Access address 0 to wake up the chip */ Gpu_HostCommand(ho...
- Mon Jul 08, 2019 4:00 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: Updating Button Text And Colour
- Replies: 5
- Views: 4686
Re: Updating Button Text And Colour
Hi Andrew, I'm sorry to hear that your experience with our EVE was not optimal. Understandably, the FT812/813, though very capable, has quite a steep learning curve. I'm glad to hear that you would be willing to try out our GTT. Our GTT will be much easier to develop for, and I'm confident you'll fi...
- Mon Jul 08, 2019 3:56 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE2-38G question about of the touch calibration
- Replies: 9
- Views: 8327
Re: EVE2-38G question about of the touch calibration
Hi Suresh, Thank you for clarifying. Could you try replacing the following lines in MO_Calibrate: //Ft_Gpu_Hal_WrMemFromFlash(phost,RAM_G,TOUCH_DATA_U8,sizeof(TOUCH_DATA_U8)); Ft_Gpu_Hal_WrMemFromFlash(phost,RAM_CMD,TOUCH_DATA_U8,sizeof(TOUCH_DATA_U8)); with Gpu_Hal_WrCmdBuf(phost, CTOUCH_CONFIG_DAT...
- Fri Jul 05, 2019 8:36 am
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE2-38G question about of the touch calibration
- Replies: 9
- Views: 8327
Re: EVE2-38G question about of the touch calibration
Hi Suresh,
It looks like your photo didn't upload properly. Please try uploading the photo again.
Also, are you sure you are using a capacitive touch screen? In your other posts, it looks like you are using a resistive touch screen.
Cheers,
Daniel
It looks like your photo didn't upload properly. Please try uploading the photo again.
Also, are you sure you are using a capacitive touch screen? In your other posts, it looks like you are using a resistive touch screen.
Cheers,
Daniel
- Thu Jul 04, 2019 5:05 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE2-38A-BLH-TPR Screen resolution & Touch screen issue
- Replies: 10
- Views: 17187
Re: EVE2-38A-BLH-TPR Screen resolution & Touch screen issue
Hi Suresh, Each resistive touch panel has it's own calibration values, and therefore, values that work for my display may not work properly for yours. I strongly suggest you try implementing the calibration function into your code and extracting the appropriate calibration values that way. Cheers, D...
- Thu Jul 04, 2019 5:03 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: Updating Button Text And Colour
- Replies: 5
- Views: 4686
Re: Updating Button Text And Colour
Hi Andrew, Welcome to the forums! Here's a piece of code that will change the state of the button when it's held down. int tag = 0; while (1) { tag = Ft_Gpu_Hal_Rd8(phost, REG_TOUCH_TAG); Ft_Gpu_CoCmd_Dlstart(phost); Ft_App_WrCoCmd_Buffer(phost, CLEAR_COLOR_RGB(255, 255, 255)); Ft_App_WrCoCmd_Buffer...
- Wed Jul 03, 2019 5:17 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE2-38A-BLH-TPR Screen resolution & Touch screen issue
- Replies: 10
- Views: 17187
Re: EVE2-38A-BLH-TPR Screen resolution & Touch screen issue
Hi Suresh, 1) The EV2-38A is a little bit different from our other displays, as it is a 4.3" display cut in half. This means that it needs to use the 4.3" timing data in order to operate properly. Due to this, the FT81X's calibration command won't operate properly. That said, we have made ...
- Wed Jun 19, 2019 2:50 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE2-38G question about of the touch calibration
- Replies: 9
- Views: 8327
Re: EVE2-38G question about of the touch calibration
Hi Chris, I have created a program that will specifically load the capacitive touch calibration file onto the EVE display. The example includes 2 different calibration functions. One function (Calibrate_Cap_Touch) will read the calibration values from the SD card and upload them to the display. You ...
- Wed Jun 12, 2019 3:15 pm
- Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
- Topic: Help with VK204-25 I2C communication
- Replies: 9
- Views: 14939
Re: Help with VK204-25 I2C communication
Hey Leonardo,
Any luck establishing communication with the VK204-25?
Cheers,
Daniel
Any luck establishing communication with the VK204-25?
Cheers,
Daniel
- Mon Jun 10, 2019 4:15 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: require code for designing on EVE2-70A
- Replies: 19
- Views: 21773
Re: require code for designing on EVE2-70A
Hi Madhusudan.Jadhav, So you are not able to read '7C' from the FT81X during startup? The FT81X does require some time to start up. Could you try implementing a short delay at the beginning of your code to allow the EVE to boot properly? I'd say you start with 1000mS to start with. Once you have con...
- Thu Jun 06, 2019 10:39 am
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: Make EVE2-29A look like a green crt display
- Replies: 16
- Views: 11226
Re: Make EVE2-29A look like a green crt display
Haha I hope it comes in a timely manner. I'd like to see a photo of the project once everything is all said and done.
- Wed May 29, 2019 12:31 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: Make EVE2-29A look like a green crt display
- Replies: 16
- Views: 11226
Re: Make EVE2-29A look like a green crt display
Hi Bob, Yeah, I guess my comments in the code were pretty vague eh? It also looks like the resolution values listed in the calculations are wrong as well. I must have been daydreaming of the weekend when I wrote those comments haha. The BITMAP_TRANSFORM registers are described in sections 4.12 to 4....
- Wed May 29, 2019 9:29 am
- Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
- Topic: Help with VK204-25 I2C communication
- Replies: 9
- Views: 14939
Re: Help with VK204-25 I2C communication
Hi Leonardo,
What pins are you connected to on the Arduino? Have you tried swapping the I2C RX and TX lines?
Cheers,
Daniel
What pins are you connected to on the Arduino? Have you tried swapping the I2C RX and TX lines?
Cheers,
Daniel
- Tue May 28, 2019 10:08 am
- Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
- Topic: Help with VK204-25 I2C communication
- Replies: 9
- Views: 14939
Re: Help with VK204-25 I2C communication
Hi Leonardo,
My bad. The 'H's were meant to denote that the values were in hex.
Are any jumpers present on the J0-J3 pins? Also, what commands/data are you sending to the display?
Cheers,
Daniel
My bad. The 'H's were meant to denote that the values were in hex.
Are any jumpers present on the J0-J3 pins? Also, what commands/data are you sending to the display?
Cheers,
Daniel