Search found 843 matches

by Clark
Mon Sep 10, 2007 1:44 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: GLK12232-25-SM: text display broken
Replies: 5
Views: 3783

Hi Alex, Glad to hear that your board has been miraculously revived by MOGD#. The only situation I can think of that may have triggered this chain of events is a change in your current font settings. If your current font had been changed to a location where no font was stored you would not be able t...
by Clark
Mon Sep 10, 2007 1:32 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: lk 204-25 keypad problem
Replies: 5
Views: 3488

Hi Swetha, Thanks for your question. Glad to hear that your display is almost operational again. I'll be able to help you more if you can tell me what response you are receiving from the unit when you press keys from the each of the four rows. You can use uProject to do this; just go to the "Main" t...
by Clark
Fri Sep 07, 2007 2:26 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Errors.
Replies: 2
Views: 2514

Hi jros3e, Thanks for your question. It sounds like you have a rather common problem, which is easily remedied. LCDC constantly uses the COM port while it is running, you will have to close any screens that may be running on LCDC, and perhaps even the entire program to stop it from using the port. T...
by Clark
Fri Sep 07, 2007 11:23 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Mechanical front panel template for GLK19264-7T-1U-WB
Replies: 7
Views: 4815

Mechanical front panel template for GLK19264-7T-1U-WB

Hi bwhiten,

The designer of our panels has managed to dig up this mechanical drawing of one of our GLK19264 face plates which I have attached to this post. Hopefully this will contain the detail you require.

Good luck with the front panel design,

Troy
by Clark
Fri Sep 07, 2007 10:35 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Mechanical front panel template for GLK19264-7T-1U-WB
Replies: 7
Views: 4815

Mechanical front panel template for GLK19264-7T-1U-WB

Hi bwhiten, Thanks for your question. Sorry to hear that you have not been able to find mechanical drawings detailed enough for your design, I have contacted the designer for our panels and hope to find a suitable drawing for you. I'll let you know as soon as I have found more information on the GLK...
by Clark
Wed Sep 05, 2007 3:04 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: I2C and PICC ... not working?
Replies: 19
Views: 16002

Hi Amega,

Thanks for your questions. Unfortunately, these pertain to a post from another user, and his code, so I can give you little information on this topic. Hopefully Russ can help you out, regarding his code.

Best of luck in this problem,

Troy
by Clark
Wed Sep 05, 2007 12:17 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: GLK12232-25-SM: text display broken
Replies: 5
Views: 3783

Hi Alex, I would have to say that I have never heard of a display erasing a font, however, I have not been here very long. Nonetheless, I would like you to try to upload a font to the display and ensure that it is selected within MOGD# using the 'Current Font' option to confirm that a font is in fac...
by Clark
Tue Sep 04, 2007 4:59 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: GLK12232-25-SM: text display broken
Replies: 5
Views: 3783

Hi Alex, Thanks for your question. When a GLK does not display text that is sent to it, it may be because it is lacking a font. I would recommend using the MOGD# program to upload a font to the unit and attempting to write to it again. Hopefully this will produce some results from your display, Troy
by Clark
Tue Sep 04, 2007 10:52 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: LK202-25 Manual Override problem
Replies: 2
Views: 2559

Hi Dadir, Thanks for the question, I will do my best to guide and enlighten. First of all, you are right, the DATA LOCK command is incorrect in the manual, it should read remember "yes", I will be working to fix that shortly. As for the SAVE DATA LOCK command, you may be experiencing a known problem...
by Clark
Tue Sep 04, 2007 10:11 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: What's e LK204-25 LCD C programme 4 ATmega8 microcontroller?
Replies: 7
Views: 4996

Hi Darren, Thanks for your question. C programming our LCD's is as easy as following the commands in your manual and learning serial transmission in C. I can help you with any problems you have with our commands, and would recommend using 'raw data' commands within our development tool uProject to g...
by Clark
Fri Aug 31, 2007 2:50 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Reading Multiple Keys presses over I2C using a LK204-25
Replies: 4
Views: 2951

Hi Dime,

I have sent you the details required to fill your RMA in a personal message, just follow them and we'll have your LK204-25 firmware up to date.

Thanks,

Troy
by Clark
Fri Aug 31, 2007 10:27 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Uploading a bitmap programmatically on a GLK240128-25
Replies: 2
Views: 2679

Hi Ron, Let me first congratulate you on the successful creation of an adverb for 'by programming means', I may start using that. As for your question, you are right, the uploading pseudo code in the manual is not quite correct. I will soon be working to correct it, but for now I have included the c...
by Clark
Mon Aug 27, 2007 9:39 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Can't uploading a font to device
Replies: 1
Views: 2131

GLK24064-25 LCD Font Uploading

Hi Maxmazor, Thanks for the question, I think you'll be happy to learn that there may be an easy solution to your problem. The GLK 24064-25 only has 16KB of memory, so there is a limit to the number of bitmaps and fonts that you can download to it. The message you receive may be a result of that mem...
by Clark
Thu Aug 23, 2007 4:48 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Need help creating and uploading a font
Replies: 3
Views: 2712

Custom Font

Hi Brent, Thanks for the question, good to see you are exploring the features of your LCD. You can create your own custom fonts by modifying existing ones using the 'Modify' tab in MOGD#; just find a suitable font, choose an empty character space, or one you don't really want, and click the pixels t...
by Clark
Tue Aug 21, 2007 2:09 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: 5 1/4 Mounting Bracket
Replies: 3
Views: 2279

5 1/4 PC Bay Insert

Hi Norman, Thanks for getting those details. I have contacted one of our local suppliers to try to get a similar case, but unfortunately they do not carry the Fox Conn brand so I am unable to be much more help at this point. Short of modifying the mounts yourself, the only advice I can give you is t...