Search found 794 matches
- Wed Dec 28, 2022 10:10 am
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: How to display many tiles on the screen
- Replies: 1
- Views: 4191
Re: How to display many tiles on the screen
Hello Zoran, Thank you for contacting Matrix Orbital technical support. I will forward your question to my colleague, and update you when I have the information. In the mean time can I please get the serial number on your EVE unit? It's a small clear sticker with format xxMxx-xxxx. Thank you, Raquel
- Tue Dec 20, 2022 2:27 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE3x-70A display parameters
- Replies: 1
- Views: 4368
Re: EVE3x-70A display parameters
Hello John, Here is the timing for the EVE3x-70A: DWIDTH = 800; DHEIGHT = 480; HCYCLE = 928; HOFFSET = 127; HSYNC0 = 40; HSYNC1 = 88; VCYCLE = 525; VOFFSET = 44; VSYNC0 = 13; VSYNC1 = 16; PCLK = 2; SWIZZLE = 0; PCLK_POL = 1; HSIZE = 800; VSIZE = 480; CSPREAD = 0; DITHER = 1; Hope this helps. Thank y...
- Tue Nov 29, 2022 9:01 am
- Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
- Topic: Find out if LCD panel is connected to serial port
- Replies: 3
- Views: 4689
Re: Find out if LCD panel is connected to serial port
Sorry, I assumed you have a USB model.
Unfortunately, no there is no way of knowing a display was plugged in via the serial com port without writing to it.
Thank you,
Raquel
Unfortunately, no there is no way of knowing a display was plugged in via the serial com port without writing to it.
Thank you,
Raquel
- Mon Nov 28, 2022 12:19 pm
- Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
- Topic: Call startup screen when PC powers off
- Replies: 3
- Views: 4965
Re: Call startup screen when PC powers off
Glad to hear!
-Raquel
-Raquel
- Mon Nov 28, 2022 12:18 pm
- Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
- Topic: Find out if LCD panel is connected to serial port
- Replies: 3
- Views: 4689
Re: Find out if LCD panel is connected to serial port
Hello,
Thank you for posting on the forum.
You can check for ttyUSB0 to know when a display is plugged in.
To further confirm, ask for a module type or version number (please see commands in the manual) and check the display's reply.
I hope this helps.
Thank you,
Raquel
Thank you for posting on the forum.
You can check for ttyUSB0 to know when a display is plugged in.
To further confirm, ask for a module type or version number (please see commands in the manual) and check the display's reply.
I hope this helps.
Thank you,
Raquel
- Fri Nov 18, 2022 4:31 pm
- Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
- Topic: Call startup screen when PC powers off
- Replies: 3
- Views: 4965
Re: Call startup screen when PC powers off
Hello Madz, Thank you for posting on the forum. I wonder if you please give Boot Logo a try: https://www.matrixorbital.com/index.php?route=download/download/get&did=543 First configure the Serial Port; then the Display Size (4x20). Make your changes - write what you want for your start up screen...
- Tue Sep 13, 2022 2:06 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: Any Third-Party library support for Matrix Orbital?
- Replies: 4
- Views: 5160
Re: Any Third-Party library support for Matrix Orbital?
Hello Matt, Thank you for posting on the forum. And thank you for considering our EVE series as alternative for your current project. You may please find our sample code (and library) here: https://github.com/MatrixOrbital There are available software tools from Bridgetek: https://brtchip.com/ic-mod...
- Mon Sep 12, 2022 3:00 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE3x-70A electrical connection documentation
- Replies: 5
- Views: 5550
Re: EVE3x-70A electrical connection documentation
Hi John,
I am glad you have figured things out.
If you need to have the EVE3x-70A customized for your needs, we can setup a custom for you (such that certain resistors are populated).
Thank you,
Raquel
I am glad you have figured things out.
If you need to have the EVE3x-70A customized for your needs, we can setup a custom for you (such that certain resistors are populated).
Thank you,
Raquel
- Thu Sep 01, 2022 1:56 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE4x-40G-IPS Display Flicker and Speaker Not Working
- Replies: 1
- Views: 4123
Re: EVE4x-40G-IPS Display Flicker and Speaker Not Working
Hello, Thank you for posting on the forum. I have replied to your email via the tech support queue. I also shared a *.exe for the EVE4x-40G to test the hardware. It sounds like you are having a power issue. You mentioned that you are seeing 3.3V on the display, can you please tell me where you measu...
- Thu Aug 18, 2022 10:11 am
- Forum: GTT Designer
- Topic: No touch response
- Replies: 4
- Views: 11132
Re: No touch response
Hello, If you try to calibrate this time, you will have better chances of being successful. GTT will automatically write the touchcal.dat when it finishes a successful calibration. This file is specific to your GTT unit and therefore is not downloadable, or something you can just copy to the unit. B...
- Wed Aug 17, 2022 3:23 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: GPIO Short for Haptic/Amplifier Enable
- Replies: 2
- Views: 4416
Re: GPIO Short for Haptic/Amplifier Enable
Hello,
Thank you for posting on the forum.
Yes, GPIO3 controls the motor and GPIO2 controls the amplifier power (there is a minor error in manual, will have this corrected).
Please note motor is active low, and amp power is active high.
Let me know how it turns out.
Best Regards,
Thank you for posting on the forum.
Yes, GPIO3 controls the motor and GPIO2 controls the amplifier power (there is a minor error in manual, will have this corrected).
Please note motor is active low, and amp power is active high.
Let me know how it turns out.
Best Regards,
- Wed Aug 17, 2022 3:05 pm
- Forum: GTT Designer
- Topic: No touch response
- Replies: 4
- Views: 11132
Re: No touch response
Hello,
Thank you for posting on the forum.
I am sorry for the delayed reply.
I understand that your issue had moved to a different problem now (as I correspond via email).
For posterity, your GTT maybe having touch calibration which could be caused by a misbehaving SD card.
Best Regards,
Thank you for posting on the forum.
I am sorry for the delayed reply.
I understand that your issue had moved to a different problem now (as I correspond via email).
For posterity, your GTT maybe having touch calibration which could be caused by a misbehaving SD card.
Best Regards,
- Thu Jul 07, 2022 4:30 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: How to use ESD with EVE2-38G
- Replies: 2
- Views: 4314
Re: How to use ESD with EVE2-38G
Hello JG,
Thank you for posting on the forum.
Please check out this guide
Let me know how it turns out.
Thank you,
Thank you for posting on the forum.
Please check out this guide
Let me know how it turns out.
Thank you,
- Wed Jul 06, 2022 1:55 pm
- Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
- Topic: LK204-7T LCD issue
- Replies: 2
- Views: 4566
Re: LK204-7T LCD issue
Hello Dave,
Thank you for posting on the forum.
While you applied manual override on the LK204-7T, did you save the settings?
Can you please send me an image of the display, and how it is not working?
Please email to support@matrixorbital.ca
Thank you,
Thank you for posting on the forum.
While you applied manual override on the LK204-7T, did you save the settings?
Can you please send me an image of the display, and how it is not working?
Please email to support@matrixorbital.ca
Thank you,
- Mon Jun 20, 2022 3:45 pm
- Forum: GTT Designer
- Topic: Button Background color (GTT2.5)
- Replies: 1
- Views: 4584
Re: Button Background color (GTT2.5)
Hello Polina, Thank you for posting on the forum. As per our last chat conversation, I have been corrected: For the rectangle, triangle and circle buttons, what is referred to as 'foreground' is actually the text color. There is no changeable background color property, as the background is actually ...