Search found 247 matches
- Fri Sep 07, 2018 11:39 am
- Forum: GTT Designer
- Topic: No Display Found
- Replies: 9
- Views: 12605
Re: No Display Found
Hi Dean, Please try connecting your GTT to your Mac, and opening a new project in the GTT Designer. Once opened, could you check if the "Deploy" button is grayed out? If it is grayed out, please go to Tools>Switch mode. This should switch your display into Mass Storage mode, which can be v...
- Fri Sep 07, 2018 8:54 am
- Forum: GTT Designer
- Topic: No Display Found
- Replies: 9
- Views: 12605
Re: No Display Found
Hi Dean, I understand you recently purchased a GTT29A-USB display, and you're having difficulties connecting to the GTT Designer. The GTT's Mass Storage USB header needs to be connected in order for the display to be detected. Have you connected both the USB Mass Storage header, and USB communicatio...
- Fri Aug 31, 2018 4:21 pm
- Forum: GTT Series
- Topic: GTT70A-TRP-BLM-B0-H1-CS-V5-ND hard to get to communicate
- Replies: 15
- Views: 21032
Re: GTT70A-TRP-BLM-B0-H1-CS-V5-ND hard to get to communicate
Hi KH,
Could you send over a photo of how you connected your RS232 display?
Cheers,
Daniel
Could you send over a photo of how you connected your RS232 display?
Cheers,
Daniel
- Wed Aug 22, 2018 1:49 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE2-29A-BLM-TPN Configuration
- Replies: 15
- Views: 13910
Re: EVE2-29A-BLM-TPN Configuration
Hi Arup, It is unfortunate to here that you were unable to get the your EVE display up and running. Were you able to set all of your GPIOX bits high? I have been testing with my unit here, and it appears that if your GPIOX register isn't configured properly, the display won't appear properly. The re...
- Wed Aug 22, 2018 12:24 pm
- Forum: GTT Series
- Topic: GTT70A-TRP-BLM-B0-H1-CS-V5-ND hard to get to communicate
- Replies: 15
- Views: 21032
Re: GTT70A-TRP-BLM-B0-H1-CS-V5-ND hard to get to communicate
Hi KH, After testing the issue here on a few different PC's, I was able to replicate your issue on an older build of Windows 7. It appears that you are correct. In my case, the WinUSB driver was not automatically installed for the GTT Bulk-IO device.I had to use a third party program to install the ...
- Mon Aug 20, 2018 11:23 am
- Forum: GTT Series
- Topic: GTT70A-TRP-BLM-B0-H1-CS-V5-ND hard to get to communicate
- Replies: 15
- Views: 21032
Re: GTT70A-TRP-BLM-B0-H1-CS-V5-ND hard to get to communicate
Hi KH,
The USB driver that you downloaded is correct.
It looks like 3 of your images did not display properly. Could you try posting your USB driver images again? I would like to know which errors you are getting when trying to install the USB drivers.
Cheers,
Daniel Divino
The USB driver that you downloaded is correct.
It looks like 3 of your images did not display properly. Could you try posting your USB driver images again? I would like to know which errors you are getting when trying to install the USB drivers.
Cheers,
Daniel Divino
- Thu Aug 16, 2018 8:47 am
- Forum: GTT Series
- Topic: GTT70A-TRP-BLM-B0-H1-CS-V5-ND hard to get to communicate
- Replies: 15
- Views: 21032
Re: GTT70A-TRP-BLM-B0-H1-CS-V5-ND hard to get to communicate
Hi KH, Please try connecting power and USB mass storage to the display. Then try connecting to the GTT Support Tool/GTTProject. Make sure to specify a baud rate of 115200, and enable flow control. You can find the USB Drivers on our website here: https://matrixorbital.ca/drivers/usb-drivers Cheers, ...
- Tue Aug 14, 2018 4:33 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE2-29A-BLM-TPN Configuration
- Replies: 15
- Views: 13910
Re: EVE2-29A-BLM-TPN Configuration
Hi Arup, I've taken a look at your display code once again and I've noticed you are setting your GPIO to 0x80 setting bit 7 high. Could you try setting your GPIO to 0xFFFF. As described in the FT81X Programmer's guide: Bit 3-0: Writing or reading the pin of GPIO 3-0. 1 for high and 0 for low. Bit 8-...
- Mon Aug 13, 2018 2:51 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: Matrix Orbital EVE2 TFT Sub-Q Warmer
- Replies: 0
- Views: 15280
Matrix Orbital EVE2 TFT Sub-Q Warmer
Hello again! We're back with another project utilizing our EVE2-38 display. This project was developed to make transferring subcutaneous fluid easier for pet owners. ABOUT THIS PROJECT The Cat https://hackster.imgix.net/uploads/attachments/543804/dscn0132-me-2_haJ6PUFBhQ.jpg?auto=compress%2Cformat&a...
- Mon Aug 13, 2018 9:52 am
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE2-29A-BLM-TPN Configuration
- Replies: 15
- Views: 13910
Re: EVE2-29A-BLM-TPN Configuration
Hi Arup, You can take a look at our EVE2 appnotes for example code. All of our EVE2 appnotes contain information regarding how to setup the display. Although you are running on a different platform, the order that commands/data is sent will still apply. You can find our appnotes available for downlo...
- Thu Aug 09, 2018 5:19 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE2-29A-BLM-TPN Configuration
- Replies: 15
- Views: 13910
Re: EVE2-29A-BLM-TPN Configuration
Hi Arup, Upon first glance, it looks like your initial setup is correct but can you tell me why you are writing 4 to REG_DLSWAP instead of the valid 2, or 1? Sending a 4 to REG_DLSWAP will not have the desired effect, and in the programmer's manual, it specifies that only 1 and 2 should be written t...
- Tue Aug 07, 2018 4:02 pm
- Forum: EVE2 & EVE3 & EVE4 SPI TFT's
- Topic: EVE2-29A-BLM-TPN Configuration
- Replies: 15
- Views: 13910
Re: EVE2-29A-BLM-TPN Configuration
Hi Arup, Welcome to the forums! I understand you are having difficulties communicating with your EVE-29A-BLM-TPN display. First, I suggest you take a look at our EVE application notes which are pre-made projects that demonstrate how to setup and configure communication with the display. You can find...
- Thu Aug 02, 2018 3:46 pm
- Forum: GTT Series
- Topic: GTT70A-TRP-BLM-B0-H1-CS-V5-ND hard to get to communicate
- Replies: 15
- Views: 21032
Re: GTT70A-TRP-BLM-B0-H1-CS-V5-ND hard to get to communicate
Hi KH, I apologize for the delay. Could you take a look at your port settings in Device Manager? Please ensure that your com port's baud rate (default 9600) matches the GTT Support Tool's baud rate (default 115200), and the GTT's baud rate. Also, make sure that Flow control is set to none. Once you ...
- Mon Jul 23, 2018 11:48 am
- Forum: GTT Series
- Topic: GTT70A-TRP-BLM-B0-H1-CS-V5-ND hard to get to communicate
- Replies: 15
- Views: 21032
Re: GTT70A-TRP-BLM-B0-H1-CS-V5-ND hard to get to communicate
Hi Portwellsg, I believe you had contacted me last week regarding the same issue. In your message you sent a screenshot of your GTT Support tool settings, and it appeared that Flow Control was enabled on your GTT Support Tool. Please note that the GTT comes with Flow Control disabled by default. I s...
- Tue Jul 17, 2018 1:37 pm
- Forum: General Chat
- Topic: Hello
- Replies: 1
- Views: 8314
Re: Hello
Hi Franz,
Welcome to the forums! We're excited to have you in our community, and we're looking forward to see what kind of projects and ideas you can contribute!
Cheers,
Dan
Welcome to the forums! We're excited to have you in our community, and we're looking forward to see what kind of projects and ideas you can contribute!
Cheers,
Dan