Hi Ghost, Looks like my colleague was able to get to your question, sorry to hear the answer is a little intimidating. If you have a Windows machine, I think you'll be rather surprised at how easy issuing commands can be using our interface program. If you have not already, I would urge you to take ...

Hi Peter, Thanks for the additional information, it has helped a great deal, although I hope it didn't cause you too much trouble. The first thing I have noticed is that our manual is a little confusing when it comes to manual override; the pins that should be jumped are the middle two, pin 6 and 7 ...

Hi Ghost,

Thanks for your question, I believe that my colleague has provided some information on the PWM start up issue you have been experiencing with your fan controllers here.

Hi Ghost,

Thanks for the tip, I know this will help many of the folks using our displays and LCDC on their rigs get the most out of their units.

Troy

Hi Katakana, Thanks for your question, good to hear that you are thinking about implementing our new GX Typhoon display in your application. Unfortunately, there is currently no lesser version of this display; this is our very first Tri Color model! As you can tell, we are quite excited about this n...

Hi Lugiber, Thanks for the additional information that you have provided, it will definitely help me to diagnose your problem. Unfortunately, as I am sure you are aware, there is currently little in the way of Linux support for our displays, so the news that you have been able to use MOGD is very go...

Hi Chris,

Thanks for the post, due to the nature of your problem, a Technical Support representative will contact you shortly to answer all of your questions directly.

Thanks,

Troy

Hi Lugiber, Thanks for your question, sorry to hear that your GLK12232-25-SM has been acting rather strangely of late. First, I'd like to ask if you began experiencing this problem before or after you switched computers, to isolate the problem to the display or the computer. Second, unfortunately, y...

Hi Mike, Thanks for your question, good to see that you are experimenting with some of the bitmap features of your GLK24064-25. If you would like to upload a bitmap directly to your display, you will have to follow the file upload protocol outlined in your manual which includes the send, echo, and a...

Hi Philium, Thanks for your question, sorry to hear that the solder jumpers require a little more effort than you would like to spend. Unfortunately, the solder pads must be connect for one of the protocols that you have listed for the display to work, so it would not be possible to remove them all....

Hi Bobo, Thanks for the question, sorry to hear that you've had a little trouble getting your MOS-AL-162A display up and running. I think that you will be able to find all the information you'll need to get started in the manual for your unit. Each of the communication protocols will be available in...

Hi Ghost in the Shell, Thanks for your question, I believe that one of our Sales representatives has responded to your concerns regarding LCDC, I'll see if I can't point you in the right direction for your keypad issues. The section for the keypad can be found in your manual in section 9 on page 36....

Hi Crosius, It's great to hear that you've got your LCD up and running! Code always seems to have the rather unintelligent nature of doing only what you tell it to, but it's good to see that you've got it figured out. We're always glad to provide developers what ever help we can to realize the full ...

Hi Crosius, Thanks for your question, I believe my colleague has asked for a little more information about you problem; on that note I'd like to add a couple questions. First, I am a little confused about which LCD you are using, is it the LK202-24 or the LCD0821, or are you working with both? Secon...

Hi Jim, Thanks for you question, and the information that you have provided. Good to hear that you are exploring the features of your displays Dallas One-Wire connection, sorry to find that you are having some difficulty locating the required parts. I can tell you that the part number for the mating...