Search found 4 matches
- Tue Nov 17, 2015 8:14 am
- Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
- Topic: LK202-25 Lost the Plot, Cannot do Manual save
- Replies: 4
- Views: 10117
Re: LK202-25 Lost the Plot, Cannot do Manual save
Well did a simple write new i2c address,.. and that did duly "reset"the i2c address... Reinstalled my unit back into my main system,.. and duly corrupted it again,.. back to drawing board,.. reset address,.. and looked a little deeper into code.. Realised a recent change had caused a displ...
- Tue Nov 17, 2015 1:43 am
- Forum: General Chat
- Topic: any tips on unsoldering the tiny jumpers
- Replies: 5
- Views: 20340
Re: any tips on unsoldering the tiny jumpers
I see this has been a long standing post,... but for ref purposes,.. some good de-solder braid works a treat!! It allows one to pull off the excess solder and the zero ohm resistors should just fall off,.. if they don't, using a wooden tooth pick seems to be a good idea. ..But under no circumstances...
- Mon Nov 16, 2015 3:41 pm
- Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
- Topic: LK202-25 Lost the Plot, Cannot do Manual save
- Replies: 4
- Views: 10117
Re: LK202-25 Lost the Plot, Cannot do Manual save
Daniel,.. That's a good point,... I will probably give the address change a go,.. but my bigger concern is what else has changed?? Something corrupted the settings,.. ( I know not what,.. at least nothing intentional, I was playing with some clear screen stuff),.. and my fear is what else has been c...
- Mon Nov 16, 2015 8:41 am
- Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
- Topic: LK202-25 Lost the Plot, Cannot do Manual save
- Replies: 4
- Views: 10117
LK202-25 Lost the Plot, Cannot do Manual save
Hi,.. I have an LK202-25 Display,.. which has worked fine for several years,…. But today it decided to “loose the plot”,…. I have connected the display to and Arduino Mega to play with for now and have figured that some setting have gone a-stray internally,.. probably its i2c address,.. which is how...