Search found 4 matches

by diyhouse
Tue Nov 17, 2015 8:14 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: LK202-25 Lost the Plot, Cannot do Manual save
Replies: 4
Views: 8577

Re: LK202-25 Lost the Plot, Cannot do Manual save

Well did a simple write new i2c address,.. and that did duly "reset"the i2c address... Reinstalled my unit back into my main system,.. and duly corrupted it again,.. back to drawing board,.. reset address,.. and looked a little deeper into code.. Realised a recent change had caused a displ...
by diyhouse
Tue Nov 17, 2015 1:43 am
Forum: General Chat
Topic: any tips on unsoldering the tiny jumpers
Replies: 5
Views: 14351

Re: any tips on unsoldering the tiny jumpers

I see this has been a long standing post,... but for ref purposes,.. some good de-solder braid works a treat!! It allows one to pull off the excess solder and the zero ohm resistors should just fall off,.. if they don't, using a wooden tooth pick seems to be a good idea. ..But under no circumstances...
by diyhouse
Mon Nov 16, 2015 3:41 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: LK202-25 Lost the Plot, Cannot do Manual save
Replies: 4
Views: 8577

Re: LK202-25 Lost the Plot, Cannot do Manual save

Daniel,.. That's a good point,... I will probably give the address change a go,.. but my bigger concern is what else has changed?? Something corrupted the settings,.. ( I know not what,.. at least nothing intentional, I was playing with some clear screen stuff),.. and my fear is what else has been c...
by diyhouse
Mon Nov 16, 2015 8:41 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: LK202-25 Lost the Plot, Cannot do Manual save
Replies: 4
Views: 8577

LK202-25 Lost the Plot, Cannot do Manual save

Hi,.. I have an LK202-25 Display,.. which has worked fine for several years,…. But today it decided to “loose the plot”,…. I have connected the display to and Arduino Mega to play with for now and have figured that some setting have gone a-stray internally,.. probably its i2c address,.. which is how...