So I got my DF Series 120mm fans in the mail but the clicking noise they make while running at less than 100% is totally annoying. I tried all the suggestions on the forums, except adding extra circuitry and nothing seemed to help. I finally descided that the MX630 is no good for controlling 120mm f...

Here is what I want to do... If Temp >= 90 Then Fan = 100% Else If Temp < 90 and >= 85 Then Fan = 75% Else If Temp < 85 and >= 80 Then Fan = 50% Else If Temp < 80 and >= 75 Then Fan = 25% Else If Temp < 75 Then Fan = 0% Can this be done or should I be looking into trying to create a new plugin? Thanks

Well I've done some more extensive testing and research and I believe the SCYTHE S-FLEX 120mm fans are incompatable with the MX630. Even if I only hook one of them up and try to run it at less than 100% the chip on the back starts to instantly get hot. I also have a few SCYTHE DF-Series 80mm fans an...

OK, so I got the replacement unit. First I got to say awesome job on the customer service. So I have been very carefully experimenting with the new unit. I hooked up the temp probes, some 80mm fans, got some plugins working. So last I try pluging in the 120mm fans that I plan on using with it. When ...

Yesturday, I received a MX630 that I had ordered. I followed all the instructions, made sure the jumper was set to 12v, plugged in the usb, 3 fans (120mm rated at 12v, .2amps) , and the floppy connector for powering the fans. The fans and display started up and seemed to be working great. I then ins...