Search found 992 matches

by Miles
Mon Dec 12, 2005 1:53 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: TTL comms forever or recent?
Replies: 10
Views: 5257

Yes, the Rx and Tx pins will remain in the same orientation for TTL as they were for RS232. You can apply 5 Volts ONLY via the DB9. CAUTION: Voltage input via the DB9 is not regulated, therefore you must apply 5 Volts only. To apply voltage via the DB9 connector you must solder the "solder jump" loc...
by Miles
Tue Nov 15, 2005 9:09 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Contrast Issue with LK202-24-USB
Replies: 5
Views: 4477

Hi Stocky,

To adjust contrast, it has to be done via firmware. With that being said, can you please contact Tom at tlam@matrixorbital.ca and he we will discuss some RMA options with you. I appreciate your patience regarding this matter.
by Miles
Mon Nov 14, 2005 8:36 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Contrast Issue with LK202-24-USB
Replies: 5
Views: 4477

Hi Stocky,

Thank you for posting on our fourms. When the display is powered up, what does the contrast look like....is it too dark or too lite??
by Miles
Mon Nov 14, 2005 8:34 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: TTL inputs ?
Replies: 1
Views: 1750

Hi Garyb,

Thank you for the post! Yes, you can communicate via TTL, however a minimal amount of soldering needs to be done...how is your soldering skills? :D
by Miles
Fri Oct 14, 2005 8:13 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Help pluggin mx2 internally???
Replies: 4
Views: 2423

Hi equilibrium,

Thank you for contacting Matrix Orbital forums. First off, do you have an internal USB cable like the one shown here: http://www.matrixorbital.com/product_in ... munication
by Miles
Fri Oct 14, 2005 8:09 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Brain fart with my VK202-24-USB
Replies: 1
Views: 2054

Hi ehrnam45,

That you for posting on our forums. Please contact me at myero@matrixorbital.ca and we can discuss some RMA issues. We will see what we can do!! :D
by Miles
Wed Oct 05, 2005 3:41 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: Question about older display, LCD2041..
Replies: 9
Views: 4515

Hi rys,

I think I may see your problem. Please ensure that 2 jumps are made accordingly for the backlight as shown in the following picture. Let me know if this works!! :D
by Miles
Fri Sep 09, 2005 8:31 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: newbi Matrix Orbital MX232 LCD questions?
Replies: 8
Views: 3983

Like Mat said, the chance of LCDC crashing is very minimal. We only use the very best products available at Matrix Orbital and LCDC is the best on the market!! That being said, it's always a good idea to safeguard for any unforeseen circumstance. :D
by Miles
Wed Jul 20, 2005 12:21 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: LK202-205 rev 1.12
Replies: 7
Views: 4079

Thanks! :D
by Miles
Wed Jul 20, 2005 11:40 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: No native 4-pin fan support?
Replies: 14
Views: 8389

Unfortunatley the preset values are the only values that are currently available. The limitation of our controller establishes this guideline. We have looked into ways of making the frequency totally customizeable and this will not be available until our next revision. I apologize for any inconvenie...
by Miles
Wed Jul 20, 2005 11:35 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: LK202-205 rev 1.12
Replies: 7
Views: 4079

You can send them to my email account: myero@matrixorbital.ca :D
by Miles
Wed Jul 20, 2005 7:42 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: LK202-205 rev 1.12
Replies: 7
Views: 4079

Can you verify that it is a 12V module? If not, can you please take a pic of the PCB and we will let you know. Please, do not attempt to apply power if unsure of the voltage requirements.
by Miles
Tue Jul 19, 2005 7:40 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: VFD2041-V scrambled display - belkin serial cable
Replies: 1
Views: 1607

Hi madlan,

Thank you for posting on the forum. Can you tell me what baud rate you have selected in LCDC and Hyperterminal??
by Miles
Tue Jul 19, 2005 7:37 am
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: MX 512 on fire!!!!!
Replies: 2
Views: 2428

Hello Azadragon,

Please contact me at myero@matrixorbital.ca and I will resolve this situation immediately. I apologize for any inconvenience this may have caused.
by Miles
Thu Jul 14, 2005 2:34 pm
Forum: LK/ELK/VK/PK/OK/MX/GLK/EGLK/GVK/GLT
Topic: LK202-24-USB-WB BROKEN?!?!?!!
Replies: 7
Views: 3407

With the A-B USB cable connected, what is the device listed as in the Device Manger under Ports (COM&LPT) and Universal Serial Bus controllers?